Continuous Casting Water Chiller

CHARACTERISTICS

• Hourly flow rates for water from + 20 ° C to + 3 ° C: 45, 60 and 90 depending on the single tank models
• Hourly flow rates for water from + 20 ° C to + 1 ° C: 120 and 180 depending on the double tank models
• Exclusive principle of operation based on the circulation of water from the general network, in a stainless steel exchanger immersed in an ice water bath
• No draft pump required: water circulation ensured by mains pressure (connection 3/4, 20 × 27)

CONSTRUCTION

• Evaporator formed of a copper tube, in which the refrigerant circulates (R134A) – the separate networks of fluid and water avoid any risk of pollution of the casting water

• Hermetic group-housed
• Food Grade Polyester Insulated Vessel – The Continuous Flow Chiller Principle Removes Any Risk of Bacterial Contamination Due to Stagnant Water
• Double circuit stainless steel exchanger
• The thickness of the ice bank formed around the evaporator is controlled by a regulator
• Enhanced refrigerant exchange with 2 agitators
• Stainless steel cladding
• General disconnector in front
• Supplied cold water supply hose

OPTIONS

• Wall mount for RCS45 and RCS60
• Refrigerated ducting for remote implantation
• Refrigerated pipe pump kit for remote implantation of double tank models